Batur Coupe 3x2.jpg
Bentley Batur

MULLINER

Bentley Batur

In 2023, the Mulliner team unveiled the Bentley Batur – a next-generation, two-door grand touring coupé. A celebration of Bentley’s iconic 6.0 litre W12 internal combustion engine, the car delivered unprecedented power and a peerless driving experience, while ushering in a new era of Bentley design.

MULLINER

A design icon

Named after Lake Batur, a crater lake on the island of Bali known for its idyllic beauty and volcanic origins, the Batur was conceived by Bentley’s then-Director of Design, Andreas Mindt, and his team. Created to showcase a new design DNA for the entire Bentley product line, it was the second project of Mulliner’s modern coachbuilding era, following the Bacalar, the handcrafted barchetta that relaunched coachbuilding at Bentley.
 

The Batur introduced three pillars of a new design DNA. ‘Resting Beast’ referred to a muscular quality, inspired by the poise and power of a big cat before it pounces. The second pillar, ‘Endless Bonnet’ was a description of the bonnet line, originating from further back along the car’s flank and reaching out ahead of the driver. Finally, ‘Upright Elegance’ concerned the confidence of the upright front grille, inspired by the proud chest of a stallion.
 

As Andreas Mindt explained: “With the Batur, we have reimagined the Bentley design language, keeping some continuity to the past and present while also drastically changing key elements.

MULLINER

Innovations in craftsmanship

Digital additive manufacturing, more commonly known as 3D printing, has enabled the Mulliner team to explore new ways of introducing precious metals in designs never seen before in a Bentley to the interior of their cars. With the Batur came the introduction of 3D-printed titanium, for example, alongside the 18-carat Gold and Platinum options that had already been developed for the Bacalar. For the Batur, titanium was made available for trim to a wide range of fixtures in and around the car, from the iconic ‘Organ Stop’ ventilation controls and ‘Charisma’ dynamic drive selector dial in the centre console, to the exhaust finishers visible at the rear of the car.
 

The Batur also saw the first application of factory Ombré paint finish across the grill, flowing from Hyperactive Orange into Black Crystal. Finishes like these are rarely developed in the world of production cars, for the simple reason that perfecting them takes time – even for the most highly-skilled coachbuilders in the world.

On the outside, details such as 3D-printed titanium exhaust finishers allowed the Mulliner team to create details that had simply never been seen before.

  • Imperial
  • Metric
Max Track Speed
209 MPH
Max Torque
738 lb-ft
0-60 mph
3.2 s
Max Power
740 BHP
108426 zoomed.jpg
Bentley Batur engine

MULLINER

The pinnacle of W12 power

The Batur featured the most powerful 6.0 litre W12 engine ever fitted to a Bentley in the factory. This was the engine that spearheaded the rebirth of Bentley in the 21st Century, with the Continental GT in 2002. In the two decades that followed, several iterations ensured it remained at the pinnacle of automotive engineering, with the version powering the Batur considered the most advanced twelve-cylinder engine in the world.
 

Developed in collaboration with Mahle Powertrain, the Batur’s engine was comprehensively revised, with a new intake system, uprated and blueprinted turbochargers, uprated intercoolers and extensive recalibration throughout. The result: a powerplant that could deliver 750 PS and a phenomenal 1,000 Nm of torque at just 1700rpm.
 

Together, a 48-volt active anti-roll system, an electronic limited slip-differential and active torque vectoring enable the driver to switch driving mode in an instant, changing the character of the car from a comfort-focused long-distance cruiser to a hyper-GT, at home on the most challenging and rewarding of roads.
 

When it’s finally time to stop, an incredible braking system comes to the fore, featuring 440mm front carbon ceramic brakes, 10-piston front callipers and four-piston rear callipers. 

MULLINER

When sound becomes art

A groundbreaking laser etching technique was used to achieve the ‘Batur Soundwave’ effect that can be applied to the cabin’s veneers. It saw a visual representation of the soundwaves produced by the car’s engine rendered beautifully on the high-gloss fascia, whether finished in wood, colour-matched paint or coloured carbon fibre.
 

This innovative laser process allowed for unmatched levels of detail and an unprecedented level of personalisation in the finish of the cars. 

Grey leather landscape.jpg
Bentley Batur templates

A truly personal process

The Mulliner Bespoke Studio co-created every Batur with each customer, working together with the car’s eventual owner on a design journey that could add up to several hours of one-on-one discussion. Some meetings were held face-to-face, with the Mulliner representatives visiting the customers personally at their homes or offices. Others were held digitally, via video call. Physical samples of myriad materials were supplied in person or couriered to the customer – whatever was necessary to perfect each car’s specification.
 

Only once this process was complete could the baton be passed to Mulliner’s team of automotive artisans, to begin a crafting process that would take several months for each car.